| |
FTDI
US232 Two Port USB Adapter
Single Port Version
Four Port Version
Eight Port Version
US232-2
Perfect for GPS and PDA Conversion
The FTDI US232 Two Port
USB Adapter is housed in a strong plastic enclosure and designed for
rugged application areas. FTDI US232 Two Port adds two Windows
serial Com ports via it's USB connection and is compatible with new &
legacy RS-232 devices. USB Plug and Play allows easy serial port
expansion and requires no IRQ, DMA, or I/O port resources.
Connection to USB is via a 0.9m detachable USB cable ( supplied ).
Longer USB cables can be purchased separately if required - see our
Cables Page for details.
.
Features
-
Full set of RS-232 modem data and control signals ( TxD, RxD, RTS, CTS, DSR, DTR, DCD, RI, and GND
) on it's PC compatible DB9 male connector
-
Internal 128 byte transmit
buffer FIFO and a 384 byte receive buffer FIFO
-
Supports RS232 data transfer
rates of up to 460K bps
-
No external power supply is
required
-
Drivers for Microsoft
Windows '98, Windows ME, Windows 2000 and Windows XP
-
Drivers for Apple OS-8, OS-9
and OS-X
-
Drivers for Linux
See below for
drivers.
Warranty
This high quality Industrial
Duty, Dual Port adapter compares to others
selling for over $69 elsewhere. You can buy ours for much less.
Buy Now
MSRP $79.99
$49.99
Single Port Version
Four Port Version
Eight Port Version
FTDI
Drivers
Windows Drivers
Win '98/ Win ME -
Current Version = 1.08.00 ( Updated July 18th 2002 )
Win 2000/ Win XP - Current Version = 1.00.2104 (
Updated July 22nd 2002 )
To download the latest drivers for Windows 98 / 2000 / ME / XP
CLICK HERE !
The download file is a combined set of drivers for all Windows '98,
Windows ME, Windows 2000 and Windows XP. Unzip the file to a blank
floppy disk or folder on your PC. You must un-install older versions
of the driver before installing the new drivers. To read our guide to
un-installing the drivers,
CLICK HERE ! . See our
Installation Guide page
for an overview of the installation process for each generation of
Windows.
This edition of the VCP drivers is WHQL certified for Windows XP.
Please note - any alterations to the files including the INF files
will invalidate the Windows XP certificate. In practice, this will not
cause any problems other than the warning message displayed by Win XP
when installing uncertified drivers.
Apple Drivers
To download the drivers for Apple OS-8
and OS-9
CLICK HERE !
To download the drivers for Apple OS-X CLICK HERE !
Linux Drivers
Drivers for FTDI devices have been
incorporated into Linux release 2.4.0 and greater. Note : these have
been only tested with single port designs ( US232, USB-COM and USB-COMi
), and are not guaranteed to work with the multi-port USB-2COM and
USB-4COM peripherals.
|
