The finest Serial to USB
Adapter money can buy.
The US232 USB to RS232
converter is housed in an attractive translucent blue enclosure
with a 1m tethered ( fixed ) USB cable. It is ideally suited to consumer
and light industrial applications. US232 adds a Windows serial Com port
via it's USB connection and is compatible with new & legacy RS-232
devices. USB Plug and Play allows easy serial port expansion and
requires no IRQ, DMA, or I/O port resources.
US232 features a full set of RS-232 modem data and control signals (
TxD, RxD, RTS, CTS, DSR, DTR, DCD, RI, and GND ) on it's PC compatible
DB9 male connector. US232 has an internal 128 byte transmit buffer FIFO
and a 384 byte receive buffer FIFO. It supports RS232 data transfer
rates of up to 460K bps. No external power supply is required as US232
takes it's power from the USB bus.
US232 comes complete with drivers for Microsoft Windows '98, Windows ME,
Windows 2000 and Windows XP. Drivers are also available for Apple OS-8,
OS-9 and OS-X as well as Linux. See below for
drivers.
This high quality Single Port adapter compares to others
selling for $39.99 and more. You can buy ours for much less.
Package Includes
- 1 - EasySync Single Port USB Adapter
- 1 - 3' USB Device Cable A-B
- Drivers
Warranty
Price Reduced was $37.99
Buy It Now
$34.99
Single Port Integrated Cable Version
Two Port Version
Four Port Version
Four Port Version
FTDI
Drivers
Windows Drivers
Win '98/ Win ME -
Current Version = 1.08.00 ( Updated July 18th 2002 )
Win 2000/ Win XP - Current Version = 1.00.2104 (
Updated July 22nd 2002 )
To download the latest drivers for Windows 98 / 2000 / ME / XP
CLICK HERE !
The download file is a combined set of drivers for all Windows '98,
Windows ME, Windows 2000 and Windows XP. Unzip the file to a blank
floppy disk or folder on your PC. You must un-install older versions
of the driver before installing the new drivers. To read our guide to
un-installing the drivers,
CLICK HERE ! . See our
Installation Guide page
for an overview of the installation process for each generation of
Windows.
This edition of the VCP drivers is WHQL certified for Windows XP.
Please note - any alterations to the files including the INF files
will invalidate the Windows XP certificate. In practice, this will not
cause any problems other than the warning message displayed by Win XP
when installing uncertified drivers.
Apple Drivers
To download the drivers for Apple OS-8
and OS-9
CLICK HERE !
To download the drivers for Apple OS-X CLICK HERE !
Linux Drivers
Drivers for FTDI devices have been
incorporated into Linux release 2.4.0 and greater. Note : these have
been only tested with single port designs ( US232, USB-COM and USB-COMi
), and are not guaranteed to work with the multi-port USB-2COM and
USB-4COM peripherals.
